Air Filters & Air Filter Units

Air Filters

Filtering media of these air filters vary from microglassfibre paper, synthetic non-woven to HDPE depending on the particle size, filtration efficiency and application. Details are as per the below table. These filters are supplied in flange type or box/channel type in Al, GI or MS epoxy powder coating. The filtering media is incorporated inside the metallic body with Al spacers to have uniform air distribution and adequate sealing is provided to make the air filter leak proof. Gasket is provided for the flange type.

Selection of filters as per efficiency:

Efficiency	Media	Model
99.99% Down to Particle size 0.3 microns	Microglassfibre paper (imported)	TP-HEPA
99% Down to Particle size 5 microns	Synthetic non-woven sandwiched between two layers of HDPE mesh	TP-5MICRON (S)
99% Down to Particle size 5 microns	Five layers of HDPE mesh	TP-5MICRON
95% Down to Particle size 10 microns	Four layers of HDPE mesh	TP-10MICRON
90% Down to Particle size 15 to 20 microns	Three layers of HDPE mesh	TP-20MICRON

Selection of filters as per size and capacity:

Sr. No.	Size (inch)	Size (mm)	Capacity in CMH/CFM at 6 mm wg Pressure Drop
Sr. No.	Size (inch)	Size (mm)	TP-5MICRON (S)	TP-5MICRON	TP-10MICRON	TP-20MICRON	TP-HEPA
1.	24 × 24 × 12	610 × 610 × 300	3350/2000	3350/2000	5350/3250	14500/8700	1675/1000
2.	24 × 24 × 6	610 × 610 × 150	1700/1020	1700/1020	2700/1650	5600/3350	840/500
3.	20 × 20 × 6	508 × 508 × 150	1200/700	1200/700	1850/1150	3350/2000
4.	24 × 24 × 2	610 × 610 × 50	565/340	565/340	900/550	2400/1450
5.	20 × 20 × 2	508 × 508 × 50	400/250	400/250	620/375	1835/1100

Air Filter Units

Air Filter Unit with Primary Filters

Industrial Heavy Duty Air Filter Unit in MS powder coated or SS, complete with flanges on both sides and incorporated with primary air filters of 10 or 20 micron HDPE in Al construction. Number of primary air filters and overall size of the air filter unit would depend on flow rate of air/gas to be handled and operating parameters.

Air Filter Unit with Primary & Secondary Filters

Industrial Heavy Duty Air Filter Unit in MS powder coated or SS, complete with flanges on both sides and incorporated with primary air filters of 10 or 20 micron HDPE and secondary air filters of 5 micron HDPE in Al construction. Number of primary and secondary air filters and overall size of the air filter unit would depend on flow rate of air/gas to be handled and operating parameters.

Air Filter Unit with Primary & HEPA Filters

Industrial Heavy Duty Air Filter Unit in MS powder coated or SS, complete with flanges on both sides and incorporated with primary air filters of 5 micron HDPE and secondary HEPA air filters of 0.3 micron in Al construction. Number of primary and HEPA air filters and overall size of the air filter unit would depend on flow rate of air/gas to be handled and operating parameters.

Name*
Email*
Phone
Details*

Content on this page requires a newer version of Adobe Flash Player.